Expertise and quality of model making at the service of a passion
Description
This stand is designed and created to hold 1/32 and 1/24 scale model car bodys whilst spray painting. (check body sizes against max/min dims in pics).
The spring pushed the legs apart against the inside of the car body, the rubber rings help to hold it securely in place. The angle of the arms can be adjusted and locked in place with the locking clamp.
The handle is loose in the base and can easily be lifted out to paint and put back in between coats to hold the jig while the paint cures. The handle can be glued into the base for a permanent assembly if preferred.
The base has 4 x 3mm countersunk screw holes to allow you fasten the base to something like a work bench if required. this may be required if heavy die cast aluminium bodies are used with the stand at an angle to stop it tipping over.
The stand is made from PLA plastic material so should not be exposed to temperatures in excess of 40Deg C. The locking nut is designed to hold the angle the jig is set at, over tightening will cause damage
Colors of stands may vary.
Technical sheet
Height
180 mm
Scale
1:24 - 1:32
Questions
If you have any questions regarding the product, feel free to post below. Other consumers may also provide you with additional information. Log in to your member area in order to post or answer a question.
Aucune question n'a encore été posée sur ce produit. Be the first to ask a question about this product!