Magnetic Racing 082 Smartphone Gantry 2 lanes or 4 lanes

2 Lanes Version information (Could be used for 4 lanes of 1:64 Track)

This gantry will hold most Smart phones so you can use them as a lap counter for your 2 lane track or rally stage. Its wide enough to go over a piece of Carrera track which is the widest of them all.

• The Gap is 209mm, the overall width of the gantry is 289mm.
• Its 197mm tall, and 80mm deep, not including the feet that are 120mm.
• Will hold phones upto 180mm x 72mm.

The part that holds the smart phone has 2 pieces that can be moved to hold your phone in the same place every time.
And that part can be completely removed if you are not using it and don’t want to spoil the look of your circuit.
There are holes in all the right places for you to feed a charging lead up on of the towers and over to the phone.

The Chequer sign on the front is option, as is the etching of the 10 start lights, so there is plenty of scope for you to make it your own with your own little touches.
The kit also comes with a Pirelli sign for the same place if you don’t want the chequered flag board.

4 Lanes information

It is wide enough to span 4 lanes of Carrera track without borders.

• The Gap is 424mm, the overall width of the gantry is 504mm.
• Its 273mm tall, and 80mm deep, not including the feet that are 120mm or 160mm you have a choice.
• Will hold phones upto 260mm x 78mm.

NO SMART PHONE COMES WITH THIS KIT, THIS KIT IS DESINGED FOR YOU TO USE YOUR OWN PHONE.

THIS KIT IS SUPPLIED AS A FLAT PACKED MDF KIT FOR YOU TO BUILD IT. IF YOU WANT YOU CAN ALSO PAINT IT.
FULL INSTRUCTIONS ARE ONLINE ON THE MANUFACTURER'S SITE.