Zmachine Light Set ZM165MS32 Xenon

LED front and rear pre-wired lights on longer after car deslots or power is removed. The kit contains an electronic circuit board with large electrolytic capacitor and 4 LEDS : 2 front xenon (slightly bluish cool white 6500°K), 2 rear lights with integrated brake lights.
Fast warning/blinking on front and taillights alternately after 2 secondes standby (faster and therefore more visible flashing).
Magnetic sensor that switches between day and night modes and vice versa (you cannot change day/night mode while driving, you must first stop and wait 2 seconds for the warnings to start working).

Installs easily in most 1/32 slot cars.

Features :

• Lightweight kit with low power consumption.
• Protection against polarity inversion and over-current.
• Stabilized power supply for constant brightness.
• High-performance energy storage (SuperCap)
• Ultraminiature magnetic switch for instant day/night switching.
• High intensity on rear brake Leds.
• Fast and alternate flashes forward / backward after stop or run out for 30sec.
• Very short standby flashes on the rear Leds for +/- 30min.
• Store day/night mode on non-volatile memory.

Main characteristics :

• Dimensions (L x l x h) : 29 x 11 x 6 mm max (w. supercap)
• Weight : 2.52gr (switch, power connector and supercap included)
• Power supply : min 8Vdc/ac - Max 25Vdc/ac (Digital compatible)
• Power consumption : 75mA peak - 18mA continuous (@12.8Vdc)
• Lighting backup : 30 seconds in "Fast Warning" mode and >30 minutes in standby mode.