L'expertise et la qualité du modélisme au service d'une passion
Slot.it CA35a Alfa Romeo 155 V6 Ti n.7 DTM 1993 Nordschleife
Référence : CA35a
Description
Pilote : Alessandro Nannini
The Alfa Romeo 155 V6 TI is a racing car built to race in the DTM (Deutsche Tourenwagen Meisterschaft) series in 1993. At that time the German Touring Car Championship was the peak of technology for touring car racing, and it reserved for cars of Class 1 (first division or D1). The rules mandated cars with an engine displacement of 2.5 liters and 6 cylinders at most, derived from approved models and produced in no less than 25,000 units. The rules allowed deep changes to the car, provided that the external lines were maintained.
When Alfa Romeo introduced its 420 bhp, four-wheel drive 155, the more conventional rear-wheel drive Mercedes 190 couldn't matche Alfa's performance. In 1993, the Italian car dominated the category, winning 12 races out of 20 with its the two factory drivers, thus winning both drivers and constructors titles. To date, the Alfa Romeo 155 is the only non-German car to have won a DTM championship.
This Slot.it model reproduces the works No. 7 racing on the legendary Nordschleife, driven by former Formula 1 driver Alessandro Nannini.
Description des pièces détachées
- Slot.it PA01-48 Axe 48mm x2 2,90 €
- Slot.it PA40 Vis Hexagonales M2 3mm x10 4,90 €
- Slot.it PA75 Enjoliveur Alfa Romeo 155 V6 Ti type OZ pour jantes Ø15,8/16,5mm (x2+2+2) 3,90 €
- Slot.it PI09 Pignons Inline 9 dents Ø5,5mm x2 3,50 €
- Slot.it PT1228C1 Pneus 17,8x9,5mm, gomme C1 Slick x4 6,70 €
- Slot.it SP15c Puce Hornby SSD Universelle 27,90 €
- Slot.it SP19 Tresses de Cuivre Compétition 1m 5,50 €
- Slot.it SP22b Câbles Silicone Haute Flexibilité 1m - 23 AWG (0.25mm2) 4,70 €
- Slot.it SP43 Puce digital Carrera universelle 27,90 €
- Slot.it W15808215A Roues Aluminium Moyeu Court Ø15,8 x 8,2mm x2 6,90 €
- Slot.it W15808225P Jantes Plastique Ø15,8 x 8,2mm x4 4,20 €
Fiche technique
Marque
Alfa Romeo
Dossard de voiture
7
Année de Course
1993
Couleur
Rouge
Système
Analogique
Compatible Analogique
Oui
Conversion Carrera DIGITAL
Slot.it SP43
Conversion Scalextric Digital
Slot.it SP15c
Support moteur
Inline
Moteur
Slot.it MX15 V12/4 21000 rpm - 150g*cm @12V
Transmission
Propulsion (2 roues motrices arrière)
Rapport de transmission
9:28 (Pignon 9 dents - Couronne 28 dents)
Suspension
Non
Eclairage
Non
Kit d'éclairage conseillé
Zmachine ZM165D32
Aimant
Oui
Longueur
147 mm
Hauteur
44 mm
Empattement
80 mm
Pneus Arrière
Slot.it PT1228C1
Pneus Avant
Slot.it PT1228C1
Largeur axe
48 mm
Poids
69 gr
Echelle
1:32
Année de Parution
2016
Questions
Si vous avez des interrogations concernant le produit, n’hésitez pas à poster ci-dessous. Les autres consommateurs pourront également vous apporter des informations complémentaires. Connectez-vous à votre espace membre afin de pouvoir poster ou répondre à une question.
Aucune question n'a encore été posée sur ce produit. Soyez le premier à poser une question sur ce produit !