L'expertise et la qualité du modélisme au service d'une passion
Slot.it CW17 Audi R18 e-tron quattro n.2 - 1st 24h Le Mans 2013
Référence : CW17
Description
Pilotes : T.Kristensen, A.McNish, L.Duval
The R18 e-tron quattro is a hybrid version of the R18 ultra, named after Audi "e-tron hybrid technology", which consists of a front mounted electric motor working in synch with Audi integral traction system. A diesel engine provides power to the rear axle both on the Audi e-tron as well as on its more traditional sibling Audi R18 Ultra. The energy storage unit for the electric motor is a flywheel system designed by Williams Hybrid Power. The Audi R18 e-tron belongs to the 2 megajoule (2MJ) category.
A four wheels drive system, as per the Le Mans regulations, can only be used on hybrid cars if the electric motor is mounted on the opposite axle of the traditional motor. Besides, electric traction may only be available at speeds above 120 km/h (75 mph), to limit the traction advantage of a 4WD system at slow speed. Management of electric motor and of drive train is completely automatic.
On its Audi R18 e-tron Slot.it has created a 4WD system which is truly unique and innovative. In the Slot.it system, a toothed belt provides power to the front axle through two micro pulleys which are coupled to the left wheels. Here, the work of two clutched bearings (unidirectional bearings), mounted between the front wheels and the front shaft, makes it possible to transmit positive torque only, removing any braking torque, so that the model, while retaining real 4WD traction, keeps its top speed on straights and handles like it should when turning.
In 2013 the race was interrupted several times because of the numerous accidents. Eventually, for the third consecutive year a car Audi Sport Team Joest prevailed, driven by Tom Kristensen, Allan McNish and Loïc Duval.
Description des pièces détachées
Fiche technique
Marque
Audi
Dossard de voiture
2
Couleur
Gris
Système
Analogique
Compatible Analogique
Oui
Conversion Carrera DIGITAL
Slot.it SP43
Conversion Scalextric Digital
Slot.it SP15c
Support moteur
Anglewinder
Moteur
MN09ch Flat-6 20 500 tours/minute
Transmission
Transmission intégrale (4 roues motrices)
Rapport de transmission
11:28 (Pignon 11 dents - Couronne 28 dents)
Suspension
Non
Eclairage
Non
Aimant
Oui
Longueur
150 mm
Hauteur
34 mm
Empattement
93 mm
Pneus Arrière
Slot.it PT1152C1
Pneus Avant
Slot.it PT1152C1
Largeur axe
Avant 64 mm - Arrière 64 mm
Poids
86 gr
Echelle
1:32
Année de Parution
2016
Questions
Si vous avez des interrogations concernant le produit, n’hésitez pas à poster ci-dessous. Les autres consommateurs pourront également vous apporter des informations complémentaires. Connectez-vous à votre espace membre afin de pouvoir poster ou répondre à une question.
Aucune question n'a encore été posée sur ce produit. Soyez le premier à poser une question sur ce produit !