2 Dossard de voiture 2
Système Analogique
Support moteur Sidewinder
Transmission Propulsion (2 roues motrices arrière)
1:32 Echelle 1:32
48,90 €
TTC

Vous cumulez 1.44 € en achetant ce produit

Définitivement épuisé

Ce produit est définitivement épuisé et ne peut plus être commandé.

Description

Pilote : Vic Elford

The M8D was a prototype race car, built in 1970 by McLaren Cars to compete in che Can-Am Challenge Cup. In comparison with the former ‘M8’, the M8D was wider and with a lowerwing, which was also braced to the chassis, as the high mounted, suspension attached wings had been banned.
Chassis was an aluminium sheet monocoque with steel bulkheads and stressed engine. Bodywork was in glass-fibre. The engine was a Chevrolet with Lucas fuel injection, prepared by George Bolthoff; it was a 7.6 litres V8 yielding 680 Hp of maximum power. The transmission was the 4 speeds Hewland LG500.

The wheels had a 15 inches diameter, a width of 11 inches at front and 16 inches at rear. Tracks: front 1575 mm, rear 1486 mm. Wheelbase: 2387 mm. Width: 1930 mm. Length: 4166 mm. The overall weight was 634 kg.

The Castrol Monterey Grand Prix of Laguna Seca was the ninth and penultimate race of the 1971 Can-Am season. Vic Elford raced for Roy Woods Racing Team driving a M8D for the first time since the previous year, having driven all previous races with American Racing Associates’ M8E.

Documents joints

Pièces de Rechange McLaren M8D

Description des pièces détachées

Fiche technique

Marque

McLaren

Dossard de voiture

2

Couleur

Noir

Système

Analogique

Compatible Analogique

Oui

Conversion Carrera DIGITAL

Slot.it SP43

Conversion Scalextric Digital

Slot.it SP15c

Support moteur

Sidewinder

Moteur

MX06 V12/3 21 500 tours/minute

Couple

170 g*cm

Transmission

Propulsion (2 roues motrices arrière)

Rapport de transmission

11:32 (Pignon 11 dents - Couronne 32 dents)

Suspension

Non

Eclairage

Non

Aimant

Oui

Longueur

125 mm

Hauteur

30 mm

Empattement

73 mm

Pneus Arrière

Slot.it PT35 (1140C1)

Pneus Avant

Slot.it PT1088C1

Largeur axe

Avant 62 mm - Arrière 62 mm

Poids

62 gr

Echelle

1:32

Photos clients

Questions

Si vous avez des interrogations concernant le produit, n’hésitez pas à poster ci-dessous. Les autres consommateurs pourront également vous apporter des informations complémentaires. Connectez-vous à votre espace membre afin de pouvoir poster ou répondre à une question.

Poser une question

Aucune question n'a encore été posée sur ce produit. Soyez le premier à poser une question sur ce produit !

Les clients ayant achetés ce produit ont également acheté

En stock

Carrera 20577 Courbe Radius 1 30° (1 pc)
Réf : 20020577-1
En voir plus
8,90 €

En stock

Carrera 20571 Courbe Radius 1 60° (1 pc)
Réf : 20020571-1
En voir plus
15,50 €

En stock

Slot.it GS1836 Couronne 36 dents Ø18mm pour...
Réf : GS1836
En voir plus
7,70 €

En stock

Carrera DIGITAL 30365 Changement de Voie Courbe...
Réf : 20030365
En voir plus
54,90 €