Esperienza e qualità del modellismo al servizio di una passione

Slot.it Marca

Slot.it CA24a Audi R18 TDI n. 1 Monza test May 2011

: CA24a

  • Twitter
  • Pinterest
  • Mail

46,90 €

Vous cumulez 46 points de fidelité
Votre panier totalisera 46 punti qui pourront être convertis en bon de réduction pour un prochain achat.

Questo prodotto non è più disponibile

Ce produit n'est actuellement plus disponible.
Souhaitez-vous être informé par e-mail de sa disponibilité ?

OK
Consegna gratuita da 100€ acquisto*
  • 1

    Gara numero Car
    1
  • Supporto motore
    Anglewinder
  • Trasmissione
    Trazione posteriore
  • 1/32

    Scala
    1/32

Descrizione

Driver : Rinaldo Capello

The R18 TDI is a sportscar designed in 2011 by Audi, according to the Lmp1 regulations, to be engaged in the Le Mans 24 Hours and the World Endurance Championship. It is a closed cockpit car, a choice made as a consequence of the rules change introduced in 2011.

Each area of this car is designed for extreme reduction of weight; the minimum value of 900 kg required by regulations is reached by using ballasts. The carbon monocoque chassis is made in a single-piece; this solution is very light, but also very safe. The gearbox is 6-speeds, electrically actuated, built with large use of carbon fibre composite material. The whole headlights are made with LEDs.

The diesel engine is a V6, 120°, 3.7 liters displacement; fuel tank capacity is 65 liters. The engine uses a single turbo and exhaust pipe, that exits below the fin. The maximum power is 540 hp with air restrictions according to the rules, and the top speed about 335 kph. Monza is a very fast circuit, just like Le Mans, so teams often come here for testing before the 24 Hour race.
During these tests, cars don't pass through the first chicane, following the track that was used for races until the early seventies.

Scheda tecnica

  • Marca
    Audi
  • Gara numero Car
    1
  • Colore
    Nero
  • Sistema
    Analog
  • Analog Compatibile
  • Conversione Carrera DIGITAL
    Slot.it SP43
  • Conversione Scalextric Digital
    Slot.it SP15b
  • Supporto motore
    Anglewinder
  • Motore
    MN09ch Flat-6 20 500 revolutions/minute
  • Momento torcente
    200 g*cm
  • Trasmissione
    Trazione posteriore
  • Gear ratio
    11:28 (Pinion 11 teeth - Crown 28 teeth)
  • Sospensione
    Non
  • Illuminazione
    Non
  • Magnete
  • Lunghezza
    150 mm
  • Altezza
    34 mm
  • Passo
    93 mm
  • Pneumatici di dimensioni
    Davanti PT1159C1 - Posteriore PT1152C1
  • Larghezza axle
    Davanti 64 mm - Posteriore 64 mm
  • Peso
    79 gr
  • Scala
    1/32

Articoli correlati

Photos clients

Envoyer votre photo

    * Champs requis

     ou Annuler

    Chargement... Veuillez patienter.

    Chargement... Veuillez patienter.

    Votre photo a été ajouté et sera visible une fois approuvée par un modérateur

    Fermer

    Questions

    Si vous avez des interrogations concernant le produit, n’hésitez pas à poster ci-dessous. Connectez-vous à votre espace membre afin de pouvoir poster une question.

    Poser une question

    Aucune question n'a encore été posée sur ce produit. Be the first to ask a question about this product!

    Question about the product

    * Required fields
    Send

    The question has been correctly sent

    PayPal
    Carta Maestro
    Carta Visa
    Carta Mastercard
    Domande ? Contattaci
    Slot Car-Union 2020 Tutti i diritti riservati
    Slot Car-Union 2020Tutti i diritti riservati