TrackPro Contour 2a: Slot Car Track Cleaning System

The TrackPro – Contour 2a is a track cleaning module that your slot car pushes around the circuit. It wipes away dust and debris from the track surface, power rails, and slot, helping restore smooth running and consistent performance.

Key Features:

• Complete Track Cleaning – Cleans the racing surface, rails, and slot in just a few laps.
• Tire Conditioning – The pushing action helps remove dried rubber and contaminants from your drive tires, improving grip.
• 1/32 & 1/24 Scale Compatible – Works on smooth to moderately textured tracks (including Carrera, Scalextric Sport, and wood tracks).
• Not Compatible – Rough textured tracks (such as rough SCX, Ninco, classic Scalextric) and smaller scale tracks (typically 1/64 or smaller).
• Minimum Track Width Requirement – The distance from the center of the rails to the track edge (including guard rails) must be at least 1.5 inches.
• Digital Track Note – Lane changing is not supported. The module must be placed manually on each lane.

Helpful Usage Tips:

• Most modern slot cars can push the module easily, but some vintage cars (such as Eldon or Strombecker) may lack sufficient traction or power.
• For Scalextric Sport tracks: if side barriers interfere, remove the two round Velcro pads. If the car struggles, cut a small slot opening in the cloth to allow the guide to pass freely.
• Cloths can be used on both sides and are washable and reusable. Lightly dampening the cloth with a track-safe cleaner can further improve cleaning performance.

What’s Included:

• TrackPro – Contour 2a cleaning module
• 12 Swiffer cloths
• 6 microfiber cloths
• Cloth cutting template
• User guide